请安全使用高压罗茨鼓风机！

　　Please use high-pressure Roots blower safely!

　　高压罗茨风机与普通的罗茨风机对于风机各项参数要求严格，造价也相对较高，在使用过程中，我们需要注意以下几点，保证自身的安全！

　　High pressure Roots blowers and ordinary Roots blowers have strict requirements for various parameters of the blower, and the cost is relatively high. During use, we need to pay attention to the following points to ensure our own safety!

　　1、避免触碰机体外壳

　　1. Avoid touching the body shell

　　高压罗茨风机在运行中，会产生较高的温度，在使用中，避免碰触外壳，以免造成烫伤等。

　　During operation, the high-pressure Roots blower generates high temperatures. In use, avoid touching the casing to prevent burns and other injuries.

　　2、避免线路过载

　　2. Prevent line overload

　　电机在工作过程中，会随着压力的变化而变化，我们在使用时应当配置相当的电线，如果电线配置较低，很容易造成线路老化，或者过热，引起火灾。

　　During the operation of the motor, it will change with the change of pressure. We should configure appropriate wires when using it. If the wire configuration is low, it is easy to cause aging or overheating of the circuit, which can lead to fire.

　　3、避免风机超压

　　3. Prevent fan overpressure

　　风机在运转过程中，我们一定要对风机的压力进行检查，如果出现超压的情况，要及时的释放压力，保证风机在额定范围内使用。

　　During the operation of the fan, we must check the pressure of the fan. If overpressure occurs, we must release the pressure in a timely manner to ensure that the fan is used within the rated range.

　　4、避免封闭风机

　　4. Avoid closing the fan

　　高压罗茨风机在运行中，风机周围的温度也会随着电机的温度上升而上升，风机置于密闭的环境中，风机周边的温度急剧上升，可能会造成严重后果。

　　During the operation of the high-pressure Roots blower, the temperature around the blower will also rise with the temperature of the motor. If the blower is placed in a closed environment, the temperature around the blower will rise sharply, which may cause serious consequences.

　　5、避免过滤不彻底

　　5. Avoid incomplete filtering

　　空气在进入罗茨风机时一定要进行空气过滤，保证空气中的一些硬性杂质进入风机，这些影响杂质进入风机将会造成叶轮的损伤，长此以往，风机的使用寿命也会造成一定的影响。

　　When air enters the Roots blower, it must be filtered to ensure that some hard impurities in the air enter the blower. These impurities entering the blower will cause damage to the impeller, and over time, the service life of the blower will also be affected.

　　6、避免内部杂质

　　6. Avoid internal impurities

　　风机要进行定时清理，包括除去表面的一些灰尘，还有内部的一些积灰，这些杂质会造成风机散热不畅、风量减低等故障。

　　The fan needs to be cleaned regularly, including removing some dust on the surface and some accumulated dust inside. These impurities can cause problems such as poor heat dissipation and reduced air flow in the fan.

　　7、避免易耗零件长期使用

　　7. Avoid long-term use of consumable parts

　　易耗部件包括消音器、外壳金属网、皮带、轴承等，这些易耗部件一定要进行及时的检查，并定期更换，这些易耗部件的长期使用，会造成更大的风机故障。

　　Consumable components include mufflers, metal mesh shells, belts, bearings, etc. These consumable components must be inspected in a timely manner and replaced regularly. Long term use of these consumable components can cause greater fan failures.

　　8、避免带问题运转

　　8. Avoid operating with problems

　　风机如果出现异响、过度震动、异常噪音等，风机出现类似情况一定要停机检查，排除故障之后再进行运行。

　　If the fan produces abnormal noise, excessive vibration, abnormal noise, etc., it must be stopped for inspection and troubleshooting before operation.

　　本文由 罗茨鼓风机  友情奉献.更多有关的知识请点击  https://www.sdxinlujx.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from Roots blower For more related knowledge, please click https://www.sdxinlujx.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.